You're looking at the TP-Link Router Quick Setup page. Here's what each part means:
1. WAN Connection Type
The WAN (Wide Area Network) connection type is how your router connects to your Internet Service Provider (ISP).
Autodetect is usually the safest option because the router automatically tries to determine the correct connection type (Dynamic IP, PPPoE, Static IP, etc.).
If you're unsure what your ISP uses, select Autodetect.
2. MAC Address Cloning
A MAC (Media Access Control) address is a unique hardware identifier assigned to a network device.
The router is asking:
"Do you need to clone the MAC address of a previously connected computer?"
Select:
✅ No, I do NOT need to clone MAC address
In most home internet connections, MAC cloning is not required.
You may need MAC cloning only if:
Your ISP has registered a specific computer's MAC address.
Internet works when connected directly to the modem but stops working after connecting the router.
If that happens later, you can rerun the setup and try cloning the MAC address.
3. "Please select or clear the check box to enable or disable a given radio band"
This refers to your router's Wi-Fi bands.
Typical options are:
2.4 GHz ☑️
Longer range
Slower speeds
Better through walls
5 GHz ☑️
Faster speeds
Shorter range
Less interference
6 GHz (on Wi-Fi 6E/7 routers)
Fastest speeds
Shortest range
Recommended:
Keep both 2.4 GHz and 5 GHz enabled (checked).
This allows:
Older devices to use 2.4 GHz.
Newer devices to use the faster 5 GHz band.
For most home users:
Select Autodetect.
Choose No, I do NOT need to clone MAC address.
Keep 2.4 GHz and 5 GHz bands enabled.
Click Next and continue the setup.
If you tell me:
Your ISP (Airtel, JioFiber, BSNL, ACT, etc.)
Router model number
Whether internet comes from a modem/ONT or directly from a wall cable
I can tell you the exact WAN settings to choose.
Was this article helpful?
Your feedback helps us improve our technical guides.
Discover more